:	Jun 24, 2004

.

Disconnect the battery ground cable.

.

Remove the accessory drive belt.

.

Disconnect the generator electrical connectors.   Release the gaiter, remove the nut and disconnect the cable.   Disconnect the electrical connector.

.

Remove the generator.   Remove the 3 bolts.

.

: Tighten the bolts in the sequence shown. Install the generator.   Clean the component mating faces.   Tighten the bolts to 45 Nm (33 lb.ft).

.

Connect the generator electrical connectors.   Tighten the nut to 10 Nm (7 lb.ft).   Connect and secure the electrical connector.

.

Install the accessory drive belt.

.

Connect the battery ground cable.